We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
In an article recently published in the journal Additive Manufacturing, researchers discussed the evaluation of the rheology and printability of complexly formulated, nutrient-dense food printed in three dimensions (3D).
Study: Evaluation of rheology and printability of 3D printing nutritious food with complex formulations . Image Credit: Maksym Kaharlyk/Shutterstock.com
The potential to create and develop food for target populations with specific nutritional needs has received a lot of attention. One of the main reasons for the quick development of 3D food printing is the prospect of individualized nutrition in the near future.
For personalized nutrition to deliver a nutritious diet based on appropriate, balanced nutritional guidelines, complex food formulations comprising numerous elements such as fruits, dairy, vegetables, and other animal products are required. A complicated multi-component custom food composition has proven to be difficult to print due to the challenges of the extrusion-based printing method, despite the fact that nutritive formulations have been reported.
In addition to processing parameters, research on rheological characteristics and printability factors may reveal important information about how the material will behave throughout the printing process. Although rheological qualities used in 3D printing have been researched, there is always room for improvement in the quantitative relationship between these factors and printability. Since the conception of the food printing process, hydrocolloids have been used in this area because they prevent the powder particles from expanding, which affects the rheological qualities. The versatility, high reliability, low cost, and ease of handling of these hydrocolloids over others, however, have not been thoroughly examined in 3D food printing applications.
In this study, the authors described up to nine substances which included byproducts like orange peel and sustainable proteins, which were contained in the nutrient formulations (insect flour). The objective of this study was to assess and connect the printability and rheological characteristics of complex food formulations that were nutrient-dense. The pregelatinized corn starch concentration of 4–10% (w/w) and printing temperature of 27–47 °C were adjusted. The examined food inks were subjected to rheological characterization using an amplitude sweep, a shear-viscosity test, a time-dependent shear test, a shear-recovery test, a temperature sweep, and a temperature ramp in oscillatory mode. Through a digital image analysis of the geometrical characteristics of the printed structures, printability was assessed.
The team used 9 substances in the nutrient formulations that were provided in this study for the first time. These included innovative, functional dietary, unconventional ingredients, which included sustainable sources such as insect flour and byproducts such as orange peel. Additionally, preliminary mathematical connections between rheology and printability were shown for the novel formulations, and these correlations were used in the development of sophisticated food printing systems.
The researchers assessed and compared the printability and rheological characteristics of complex food compositions that were nutrient-dense. This was accomplished by varying the printing temperature and the concentration of one of the ingredients.
At nozzle temperatures of 27, 37, and 47 °C, respectively, the stress at collapse values for F1-4% were 761.6, 729.8, and 620.3 Pa. The greatest values, on the other hand, were found in F4-10%, which reached up to 1835.5 Pa at 27 °C. Even under the stress of numerous layers and notably at 27 °C, the remaining formulations showed a higher level of printability with a smaller printing percentage error compared to F1-4%. Extruded filaments from formulations F2-6%, F3-8%, and F4-10% possessed smooth, uniform shapes that allowed for the manufacture of almost square-shaped 2D structures, as opposed to the round forms or unfinished 2D structures seen in F1-4%.
The yield stress and the storage modulus increased as the pregelatinized starch concentration increased from 4 to 10%. High rheological parameter values, however, were not translated into better printability. The printability assessment revealed that formulations containing 6% and 8% pregelatinized starch were better suited for printing than the formulation containing 10%. The results demonstrated that when printing complicated formulas for the creation of customized food items, both rheology and printability analyses must be carried out.
The results showed that higher concentrations were not always better for printing. In the examination of the printability of samples where shape deformation and inconsistency were examined, F4-10% proved to be less successful than F3-8%. The deformation and flow states of formulations under various environmental variables were embodied by rheology, which was directly related to the development of 3D structural elements.
Additionally, it was established that although rheological factors were important for determining the properties of the material, some of them could not accurately predict how the material would behave after printing. High static yield stress and improved thixotropy in the extrusion and stacking system were required for food materials in order to properly characterize and correlate their rheological properties with printability, which was the main challenge in the development of a printed structure for these materials.
In conclusion, this study presented four nutrient-dense formulations combining up to nine unique and unconventional functional food ingredients. In order to potentially develop sophisticated food printing systems, preliminary mathematical correlations between the rheology and printability of such formulations were discovered. Pregelatinized starch improved the shear-thinning behavior and thermal stability of formulations by raising G', yield stress, and viscosity values while lowering δ. This improved the formulations' printability, shape retention, and stability performance, which was helpful for both printing processes.
It was possible to efficiently discover and generalize critical factors for new customized nutrient formulations by using the proposed characterization and correlation. The authors mentioned that future studies on 3D food printing may be guided by the knowledge gained from this study in order to improve the behavior of the formulations during printing. They also stated that the discoveries made could serve as a design template for the creation of unique individualized formulations that would make better choices for specialized food 3D printing items.
Maldonado-Rosas, R., Tejada- Ortigoza, V., Cuan-Urquizo, E., et al. Evaluation of rheology and printability of 3D printing nutritious food with complex formulations. Additive Manufacturing 103030 (2022). https://www.sciencedirect.com/science/article/abs/pii/S2214860422004225
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Surbhi Jain is a freelance Technical writer based in Delhi, India. She holds a Ph.D. in Physics from the University of Delhi and has participated in several scientific, cultural, and sports events. Her academic background is in Material Science research with a specialization in the development of optical devices and sensors. She has extensive experience in content writing, editing, experimental data analysis, and project management and has published 7 research papers in Scopus-indexed journals and filed 2 Indian patents based on her research work. She is passionate about reading, writing, research, and technology, and enjoys cooking, acting, gardening, and sports.
Please use one of the following formats to cite this article in your essay, paper or report:
Jain, Surbhi. (2022, July 14). Analyzing the Rheology of 3D Printed Food. AZoM. Retrieved on July 15, 2022 from https://www.azom.com/news.aspx?newsID=59548.
Jain, Surbhi. "Analyzing the Rheology of 3D Printed Food". AZoM. 15 July 2022. <https://www.azom.com/news.aspx?newsID=59548>.
Jain, Surbhi. "Analyzing the Rheology of 3D Printed Food". AZoM. https://www.azom.com/news.aspx?newsID=59548. (accessed July 15, 2022).
Jain, Surbhi. 2022. Analyzing the Rheology of 3D Printed Food. AZoM, viewed 15 July 2022, https://www.azom.com/news.aspx?newsID=59548.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
In this interview, AZoM speaks with Dr. Ralf Dupont, President of Levicron, about the potential of the new (U) ASD-H25 motor spindle for semicon industries.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022